MIL-D-21523A(Wep)
small groups wrapped in bare noninsulated aluminum foil or
other uncoated metal foil. During assembly and processing
operations such sensitive electric items should be short
circuited by clips or other devices until installed with
safety shunt in the final device. Additional precautions
for these items should include mechanical shielding to
contain or deflect fragments and blast, also electrical
shielding of' these items from induced electric currents
generated by sources such as lightning, static$ radiations
from communications apparatus$ radar, or high-frequency
heating apparatus, etc. Where necessary for-safety,
humidity of work rooms should be increased as required to
lessen electrostatic effects without excessive moisture
absorption:
Protect all explosive operations from effects
6.2.6.5
of electric current originating from equipment such as
soldering ironsj heaters, switches, wiring, motors, lights,
test instruments, etc., by suitable insulation, grounding,
separation, or shielding. Such electric sources may
initiate explosives by heat, sparks, arcs~ or due to com-
pleting an electric circuit through an electric primer$
detonator or squib. Circuits may be inadvertently com-
pleted for examples from a defective electronic soldering
iron through a grounded contact. All electric type primers,
detonators, or squibs provided with wire leads should have
the free ends of the wires bared and twisted together to
short circuit each unit, except when in process of assembly
into a finished item. Where practicable, removable short-
circuiting clips, or other devices should be employed dur-
ing manufacturing operations involving electric primers,
detonators or squibs.
Enforce, where necessary, the wearing of suit-
6.2.6.6
able safety-footwear, gloves, gogglesj respirabors j and
impregnated garments to protect personnel against burns,
poisoning, and associated industrial hazards.
Allow no fires or exposed electrical or other
6.2.6.7
sparking equipment, and little or no flammable material to
be present in loading handling, and storage sPaces.
Enforce proper "Match" and "No Smoking" rules where necessary
-17-
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business